Modern washing machines use error codes to alert you when something isn’t working correctly. While these codes may seem confusing at first, they can actually help you identify the problem quickly. Below is a helpful guide to common washer error codes and basic troubleshooting steps you can try before scheduling professional repair service.

Error Code E1 – Water Supply Problem

What it indicates:
The washer is not receiving enough water, or the water flow is too slow.

What you can do:
Start by checking that both hot and cold water valves are fully open. Inspect the inlet hoses for twisting or debris buildup. Cleaning the small inlet filters can often restore proper water flow. Also, confirm that your home’s water pressure is sufficient.

Error Code E2 – Drainage Issue

What it indicates:
The washer is unable to drain water out of the drum.

What you can do:
Locate and clean the drain filter, usually found at the lower front of the washer. Make sure the drain hose is not pinned, clogged, or positioned too low. If the issue persists, the drain pump may need professional inspection.

Error Code E3 – Load Imbalance

What it indicates:
Laundry inside the drum is unevenly distributed.

What you can do:
Pause the cycle and redistribute the clothing evenly inside the drum. Washing bulky or heavy items separately can also prevent imbalance issues. Avoid filling the washer beyond its recommended capacity.

Error Code E4 – Door Lock Error

What it indicates:
The washer cannot detect that the door is properly closed or locked.

What you can do:
Firmly close the door and check for clothing trapped around the seal. Inspect the rubber gasket for obstructions and look for visible wear on the locking mechanism. If the door lock assembly is damaged, repair service may be required.

Error Code E5 – Water Heating Failure

What it indicates:
The washer cannot heat the water to the selected temperature.

What you can do:
Try resetting the washer and selecting a different cycle. Check for power supply issues in your home. If the error continues, the heating element or temperature sensor may need replacement.

Error Code E6 – Motor or Control Issue

What it indicates:
There is a problem with the washer motor or electrical components controlling it.

What you can do:
Turn the washer off and unplug it for 10–15 minutes, then restart. If the error returns, professional diagnosis is recommended, as motor or control board repairs require expert handling.

When to Call a Washer Repair Professional

If basic troubleshooting doesn’t resolve the error, delaying repairs can lead to bigger and more expensive problems. A certified appliance technician can safely diagnose common washer error codes and provide reliable, long-lasting solutions to restore your machine’s performance.